+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8)
+--- Forum: General Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=11)
+--- Thread: Elegoo Mars Pro: Home Button moves build plate up instead of down (/showthread.php?tid=1018)
Elegoo Mars Pro: Home Button moves build plate up instead of down - Greenbolt91 - 09-07-2021
I accidentally spilled some resin from the vat the other night all over my Mars Pro. I opened it up and cleaned it and put it back together. When I go to re-level the bed though, pressing the home button makes the build plate move up roughly 3mm rather then heading downwards toward the bottom. I’m thinking it’s the limit switch, I specifically removed and cleaned it, but the problem I’m having persists. Does it sound like it’s the limit switch to you? If so, where can u find a replacement? I’ve had no luck finding one either on Elegoo’s site or Amazon.