Upgraded Elegoo Mars $250 + shipping - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Classifieds (https://www.elegoomars.com/forum/forumdisplay.php?fid=32) +--- Forum: Printers For Sale (https://www.elegoomars.com/forum/forumdisplay.php?fid=33) +--- Thread: Upgraded Elegoo Mars $250 + shipping (/showthread.php?tid=1092) |
Upgraded Elegoo Mars $250 + shipping - cliffyk - 02-04-2022 For sale is an upgraded Elegoo Mars 3D printer. It is in top operating and physical condition, with significant upgrades. Elegoo's specs are:
This printer also has a Jackson (https://jacksonproducts.net/) dual rail Z-axis column, low backlash half-nut, and low height clamp knob (see photo, a $115 upgrade), and has been upgraded to the latest Mars Pro firmware. Also included is an 8 GB USB drive, a second build platform (both have drain brackets), five replacement FEP sheets, spare screws,, scrapers, etc. The Jackson mast makes it a VERY stable and accurate machine. The LCD shutter has fewer than 20 hours on it. A BIG bonus is an infrared curing oven (see photos) of my design. built upon a microwave oven chassis (retaining the timer and turntable) using a 30 Watt 405 nm infrared LED for fast post print curing. I also have a kilogram of gray resin, alcohol and print cleaning supplies. The latest Chitubox free slicing software (https://www.chitubox.com v1.9.1) is their best ever, very stable and quite capable. Poor health forces sale of this and other electronic equipment (oscilloscopes, signal generators, etc.)--asking $250.00 plus actual shipping cost or reasonable offer for the printer--ask about other stuff. platen #1 and Jackson dual mast: Mars Pro firmware platen #2 and Jackson dual mast: Jackson dual mast: Jackson upgraded half-nut: Curing chamber lamp: Curing chamber ON: ditto; |