+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 2 Pro (https://www.elegoomars.com/forum/forumdisplay.php?fid=46)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=47)
+--- Thread: Unable to change gcode settings. (/showthread.php?tid=1245)
Unable to change gcode settings. - 1fastrttt - 10-06-2022
I've been trying to set M8489 to P1 to resolve some splashing issues but seems like no matter what I do, it won't save/apply on the machine.
If I dump the active gcode settings with M8512. I don't even see M8489 in the exported file. The file itself seems to be the firmware default.
I tried to flash on previous firmware versions and still luck. If I dump the active gcode it changes depending which firmware I use, so V4.4.3.... or V4.3.13... shows up as a comment in the first line.
I've tried .gcode or .txt extensions as well. I've started with the gcode in the firmware download. Tried making a file from scratch with just M8489 and M8500.
I seem to be "printing" the files fine because the dump gcode worked with no issue.
Any ideas? Thanks!