+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10)
+--- Thread: White resin prints fine but space grey doesn’t?? (/showthread.php?tid=1294)
White resin prints fine but space grey doesn’t?? - Eni8ma - 05-25-2023
Hello
I have a very strange issue with my printer I was hoping someone could point me to the right direction.
So I normally print with 2 resins, standard white and 8k space grey which were both working fine.
I have recently moved houses and the printer and after re leveling the printer I noticed the grey resin would fail on prints, I usually print 4 copies and 1 failed.
Now all 4 fail however the white resin prints all 4 fine. I use 2 different trays for each color I tried swapping them but same thing, I tried changing the fep, same thing. Multiple re leveling didn’t help and since the white prints fine I figured the leveling is good.
Sometimes the grey resin prints half way, sometimes less but not fully. I tried increasing the cure time to 5 seconds from my usual 2.5 but no luck.
Any suggestions would be much appreciated!
I have a Mars 3 pro
Regards