LCD Screen replaced, good first print, all others failing - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 2 Pro (https://www.elegoomars.com/forum/forumdisplay.php?fid=46) +--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=50) +--- Thread: LCD Screen replaced, good first print, all others failing (/showthread.php?tid=1302) |
LCD Screen replaced, good first print, all others failing - SudsySutherland - 07-01-2023 I recently changed my print area LCD (monochrome 2K) and applied a screen protector (I had FEP fail and get resin on the factory screen, lesson learned). First print went off without a hitch. Everything was fine. Second through fifth attempts at printing however... Off to one side with everything. I run a tank clean to get where everything started printing okay for the first few layers. If anyone has some insight, I'd appreciate it. I double checked, and my firmware is up to date to the latest on the Elegoo supports downloads for my printer. |