+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3 4K / 3 Pro 4K 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=66)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=67)
+--- Thread: Light PWM (/showthread.php?tid=1320)
Light PWM - nemox - 10-21-2023
In the Chitubox settings, in the Advanced tab, there is a Light PWM item. By default it is set to maximum 100%.
Photon manufacturers recommend to keep this setting at 60-80%. What are your thoughts on this setting for Elegoo?