Elegoo 3D Printers Forum
erased flash blocks? cannot install firmware - Printable Version

+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Firmware Updates (https://www.elegoomars.com/forum/forumdisplay.php?fid=3)
+--- Thread: erased flash blocks? cannot install firmware (/showthread.php?tid=1346)

erased flash blocks? cannot install firmware - derek attree - 03-04-2024

Hello all, 
I had a USB stick in my Mars 4 9k printer.
turned on the printer, and a counter started, "erasing flash blocks 1, 2, 3..etc"
so, going forward, I have a solid printed wall being printed at the top of the build plate.

I have attempted to install firmware 4.3.4
the "update.lcd" and "update.SH4" are DEFINITELY in the root file of the original USB stick provided, but when I go to the print section of the machine, they do not appear.

is there something I am missing?

thanks in advance,
Derek

RE: erased flash blocks? cannot install firmware - loosegoose - 04-29-2024

(03-04-2024, 11:07 AM)derek attree Wrote: Hello all, 
I had a USB stick in my Mars 4 9k printer.
turned on the printer, and a counter started, "erasing flash blocks 1, 2, 3..etc"
so, going forward, I have a solid printed wall being printed at the top of the build plate.

I have attempted to install firmware 4.3.4
the "update.lcd" and "update.SH4" are DEFINITELY in the root file of the original USB stick provided, but when I go to the print section of the machine, they do not appear.

is there something I am missing?

thanks in advance,
Derek
Hi,
Maybe you found how to fix this issue without waiting for elegy support to answer? plugged in Kingston usb and same thing happened.
Thanks, Egor