M-400 error, can't update firmware for new screen - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8) +--- Forum: General Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=11) +--- Thread: M-400 error, can't update firmware for new screen (/showthread.php?tid=1352) |
M-400 error, can't update firmware for new screen - Dr_CRR - 03-21-2024 Hi all, I have a Mars 2 pro, and have just replaced the screen with a chitusystems screen due to resin spill. I tried updating with the Elegoo firmware but the screen didn't work. I tried with the firmware available on Chitu Systems also which hasn't worked. When I try to print the update.SH4 file from Chitu (which a Redditor had a the same issue and theirs worked after updating with the those files), I receive an m_400 error and the z-axis starts spinning up, hits the top and doesn't stop unless I turn off the machine. Does anyone have any ideas? https://www.chitusystems.com/download/ - getting my firmware from here https://www.elegoo.com/pages/download - and have tried here Cheers, |