Fan Replacement - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=4) +--- Thread: Fan Replacement (/showthread.php?tid=145) |
Fan Replacement - melreth - 09-25-2019 Hi from Germany Since 1 week i'm a owner of the elegoo mars and have a lot of fun with this little magic cube ;D Did someone triede to replace the fan? RE: Fan Replacement - Just_Simply_E - 09-27-2019 (09-25-2019, 12:39 PM)melreth Wrote: Hi from Germany Yes, I have and it made it much quieter but you can still hear it. You need a 80mm x 80mm x 15mm 12v fan This is what I used: Cooler Master Sleeve Bearing 80mm Silent Fan Just connect the Red and Black wire and cut the Yellow and cover the end. RE: Fan Replacement - pirinaka - 10-04-2019 (09-27-2019, 12:58 PM)Just_Simply_E Wrote:(09-25-2019, 12:39 PM)melreth Wrote: Hi from Germany Hi, since you already dissasembled it, would it fit a 80x80x25mm or there is not enough room? RE: Fan Replacement - melreth - 10-04-2019 (10-04-2019, 02:31 AM)pirinaka Wrote:(09-27-2019, 12:58 PM)Just_Simply_E Wrote:(09-25-2019, 12:39 PM)melreth Wrote: Hi from Germany Hi, there is no more space. 15mm is maximum |