Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=4) +--- Thread: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) (/showthread.php?tid=15) |
Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - admin - 07-21-2019 Okay guys, here it is All the files and instructions on how to setup the Mars to be Network enabled.
Ive got multiple printers setup this way and all working great!!! Please make sure to open the READ ME file first!!! __________ UPDATE __________ Added the .cfg file to be used with ChiTuBox 1.5.0 Instructions on how to add properly are in the Read Me file Added setup method with V4.2.20.3_LCDM /1440x2560 /F2.9 and V4.2.20.3_LCDE /1440x2560 /F2.9 FW [attachment=21] _________DEFAULT MARS UI_________ This is the default Mars UI for when reverting back from the Epax UI [attachment=20] RE: Ethernet Enabled Printing - Simoncox - 07-21-2019 First thing tomorrow !! RE: Ethernet Enabled Printing - Lecoyote - 07-21-2019 Hello friends! Tried to import 'MARS EPAX NETWORK ENABLED.cfg' in chitubox, sliced my print... but could find no "Network Sending" option on the right side of the screen... RE: Ethernet Enabled Printing - admin - 07-21-2019 (07-21-2019, 06:16 PM)Lecoyote Wrote: Hello friends! Tried to import 'MARS EPAX NETWORK ENABLED.cfg' in chitubox, sliced my print... but could find no "Network Sending" option on the right side of the screen... Are you using ChiTuBox 1.4.0 or the newly released 1.5.0? RE: Ethernet Enabled Printing - admin - 07-21-2019 (07-21-2019, 06:16 PM)Lecoyote Wrote: Hello friends! Tried to import 'MARS EPAX NETWORK ENABLED.cfg' in chitubox, sliced my print... but could find no "Network Sending" option on the right side of the screen... After you import the .cfg file into the ChiTuBox settings, go to the print tab, does it look like this with the added options on the right side? [attachment=4] RE: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - Lecoyote - 07-22-2019 Thank you for you reply. I'm using ChiTuBox 1.5.0. After I import the .cfg file, I can't see any new optiion in the print tab. All the same. RE: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - admin - 07-22-2019 (07-22-2019, 02:49 AM)Lecoyote Wrote: Thank you for you reply. I'm using ChiTuBox 1.5.0. After I import the .cfg file, I can't see any new optiion in the print tab. All the same. Ahhh, thats why... when you downloaded the stuff, it was only the ChiTuBox 1.4.0 cfg file that was included, but download again and there is added instructions in the READ ME file and a new cfg file to be used with ChiTubox 1.5.0 RE: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - admin - 07-22-2019 If you've already done everyting else from before, all you have to do is the parts about ChiTuBox 1.5.0 now I've already tested and verified it works with 1.5.0 too, so you should be good to go RE: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - Lecoyote - 07-22-2019 [Deleted] RE: Ethernet Enabled Printing (Support for ChiTuBox 1.4.0 + 1.5.0) - admin - 07-22-2019 (07-22-2019, 03:14 AM)Lecoyote Wrote: Ok, I re-installed ChiTuBox V1.4.0 and it works! Seems not to be compatible with V1.5.0... If you go and download the new zip file at the top, I've added the instructions in the READ ME file and the .cfg file for 1.5.0 |