+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2)
+--- Thread: Maintenance of the Elegoo Mars (/showthread.php?tid=162)
Maintenance of the Elegoo Mars - ShareBits - 10-08-2019
Dear users of the Elegoo Mars,
I am considering to buy the Elegoo Mars. But before I do that, I am curious about the expected maintenance of the different parts of the printer. I also would like to know how much the maintenance costs..!
Can you people help me?
Thanks in advance
ShareBits
RE: Maintenance of the Elegoo Mars - lmenten - 10-08-2019
(10-08-2019, 04:55 AM)As far as I know, and if you are careful, you will only have to change de FEP film every now and then (13.23$ for 2, on amazon.com). Anyway, the LCD might also be a concern (19.90$, amazon too) as some are reporting defects. Oh, and yes, a few drops of lubricant for the Z axis is useful too.There are also some tips that help keeping your mars working, like applying kaplon tape around the LCD, paint tape on its sides to avoid contact of the VAT etc. Check the web for details. RegardsShareBits Wrote: Dear users of the Elegoo Mars,
I am considering to buy the Elegoo Mars. But before I do that, I am curious about the expected maintenance of the different parts of the printer. I also would like to know how much the maintenance costs..!
Can you people help me?
Thanks in advance
ShareBits