Z=0 button? - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2) +--- Thread: Z=0 button? (/showthread.php?tid=212) |
Z=0 button? - jamikus - 10-12-2019 Quick question...What is the purpose/function of the Z=0 button? RE: Z=0 button? - nico940 - 10-12-2019 Im curious if it can be activated wirh a gcode?? Could be usefull for the 1st millimeters on the Z axis issue! RE: Z=0 button? - admin - 10-13-2019 (10-12-2019, 03:37 PM)nico940 Wrote: Im curious if it can be activated wirh a gcode??Actually it can, I've already tested it and confirmed it does work RE: Z=0 button? - admin - 10-13-2019 (10-12-2019, 01:18 PM)jamikus Wrote: Quick question...What is the purpose/function of the Z=0 button? This would be used to manually set Z=0, or in other words, the build plates home position. By default it is locked out on the Mars to prevent people from driving the build plate into the LCD. |