+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Firmware Updates (https://www.elegoomars.com/forum/forumdisplay.php?fid=3)
+--- Thread: Source for latest/modified firmware (/showthread.php?tid=25)
Source for latest/modified firmware - te_chnix - 07-29-2019
Hi Matthew!
I had some layer shearing in my last print. So i decided to download your ethernet version.
Then i tried to print the exact same file on my USB Stick and somehow this happened. ([attachment=6])
Now there is layers shifting all over the bed.
Do we have a source were we can access the firmware from Elegoo and the newer ones from the board vendor?
A Downloadsection in this forum would be nice.
Greetz Robert
RE: Source for latest/modified firmware - admin - 07-29-2019
The latest Elegoo Firmware package is right above your original post.
Since you did the Epax stuff, you did the Epax UI and would need the Elegoo UI ad well. Shoot me a PM and I'll send you the Elegoo UI
