Elegoo 3D Printers Forum
Guide to regreasing / avoiding the grinding noise - Printable Version

+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10)
+--- Thread: Guide to regreasing / avoiding the grinding noise (/showthread.php?tid=328)

Pages: 1 2

RE: Guide to regreasing / avoiding the grinding noise - Boonie - 04-12-2020

(04-11-2020, 01:38 PM)BruceNscale Wrote: Good Afternoon All,

I had some issues with the Z axis jamming when repeatedly printing the same items.

Now before starting a print, I run the platen down to the FEP layer, then back to the top(up x 15 x 10mm). 

This appears to spread the lubrication and also detects most Z axis issues BEFORE the printing begins.

Happy Printing,

Bruce
Something to try, cheers.
(04-12-2020, 01:11 AM)Booniethanks Wrote:
(04-11-2020, 01:38 PM)BruceNscale Wrote: Good Afternoon All,

I had some issues with the Z axis jamming when repeatedly printing the same items.

Now before starting a print, I run the platen down to the FEP layer, then back to the top(up x 15 x 10mm). 

This appears to spread the lubrication and also detects most Z axis issues BEFORE the printing begins.

Happy Printing,

Bruce
Something to try, cheers.
Sorry still trying to figure how to reply

RE: Guide to regreasing / avoiding the grinding noise - beijinbei - 07-11-2020

Happy to see the community solving problematic issues.