+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Printing (https://www.elegoomars.com/forum/forumdisplay.php?fid=6)
+--- Forum: Resin (https://www.elegoomars.com/forum/forumdisplay.php?fid=7)
+--- Thread: Resin Settings (/showthread.php?tid=338)
Resin Settings - air2gnd - 01-25-2020
Hi to all. I have a client who requires extremely fine details in there samples. Q#1 . Is the Mars capable of doing prints of .01mm? Q#2. What would the settings be for a) gray setting (using it with great results) b) for black resin (have not tried it). I have printed as low as .03mm (great results, using standard settings)
Thanks to all.
RE: Resin Settings - fromFDMtoSLA - 01-25-2020
as every resin is different, we should know the manufacturer of your resin.
RE: Resin Settings - air2gnd - 01-26-2020
(01-25-2020, 05:27 PM)fromFDMtoSLA Wrote: as every resin is different, we should know the manufacturer of your resin.I use Elegoo Mars gray and black.
Thanks
RE: Resin Settings - captcook - 01-30-2020
(01-25-2020, 11:33 AM)air2gnd Wrote: Hi to all. I have a client who requires extremely fine details in there samples. Q#1 . Is the Mars capable of doing prints of .01mm? Q#2. What would the settings be for a) gray setting (using it with great results) b) for black resin (have not tried it). I have printed as low as .03mm (great results, using standard settings)Here are some settings i found.
Thanks to all.
https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/edit#gid=0