+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2)
+--- Thread: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? (/showthread.php?tid=343)
Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - chrisconnew - 01-30-2020
Bought a 2nd hand Elegoo Mars - seems to be printing something simple as a test ok.
I have both an Ender 3 and a Geeetech A30 - both of these printers came with a MicroSD with manuals, software, sample files etc on them and i am a digital hoarder so immediately took a backup and it's in a suitable folder in my Google Drive 3D Printing folder.
With the Mars i got the USB which came with it, but it was blank other than for a sliced file for printing a Wolverine model. Was there anything of use on the USB when you all got yours?
I have sourced a PDF manual, and have a Youtube Playlist of things to watch through - just curious what data if any came with the printer?
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - fromFDMtoSLA - 01-30-2020
what serial number does your printer have? - it's on a label on the buttom and starts with "M......"
basicly it's nothing interesting on the stick - the manual, and old version of the sclicer (chitubox) and the demo-model (Rook, as stl and presliced).
sometimes - on the old used - there are the same documents in chinese.
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - chrisconnew - 01-31-2020
I'll have to look for the rook model to use it as a test print. Could anyone share those files from the sd please?
Is there somewhere online I can check the serial number for warranty status, build date etc. Mine has the 4.3.1 lcd version
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - fromFDMtoSLA - 01-31-2020
(01-31-2020, 01:46 AM)chrisconnew Wrote: I'll have to look for the rook model to use it as a test print. Could anyone share those files from the sd please?
Is there somewhere online I can check the serial number for warranty status, build date etc. Mine has the 4.3.1 lcd version
here is the Rook from the stick - *.stl and presliced - sorry, limited upload space, will try it via email also not possible (?)
if the lcd says 4.3.1, you got the "new generation" (without network port on the mainboard),
for infos about warranty status you shoulde contact the Elegoo support
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - MistaBreed - 02-17-2020
Where can I get that machine.gcode File that was on that USB Stick?
If it is already downloadable here in this forum, it is difficult to find...
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - fromFDMtoSLA - 02-17-2020
here is the code i got for my machine - but it's for a SN# M10xxxx
so take care, using it
RE: Bought a 2nd hand Elegoo Mars - should the USB contain anything useful? - zemerick - 02-24-2020
The machine parameters gcode is available directly off of their github:
https://github.com/elegoogroup/ELEGOO-Mars-Machine-Parameters/blob/master/ELEGOO%20Mars%20Machine%20Parameters.gcode