Elegoo 3D Printers Forum
Layer / Print Time Calculator - Printable Version

+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Printing (https://www.elegoomars.com/forum/forumdisplay.php?fid=6)
+--- Forum: Additional Print Tools (https://www.elegoomars.com/forum/forumdisplay.php?fid=26)
+--- Thread: Layer / Print Time Calculator (/showthread.php?tid=353)

Layer / Print Time Calculator - admin - 02-01-2020

While Chitubox calculates the total time to print, it doesn't break it down to see what each layer cycle time is that includes the lift and retract speeds, distances, etc.  So I was bored and created an Excel spreadsheet where you can simply enter the info from Chitubox and the formulas will automatically calculate out different data like, how long a bottom layer cycle takes, how long all the bottom layers take, how long a normal layer cycle is, how long all the normal layers take and total print time.

Cool thing about this, is you can see the changes in time by changing the different variables...  



RE: Layer / Print Time Calculator - Dudemeister - 08-07-2020

Thank you!