+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10)
+--- Thread: When to Zero (/showthread.php?tid=414)
When to Zero - TristanA - 03-14-2020
Hey all,
Had a little search but couldn't find an answer.
How often do you all Re-zero, so far I have re-zero'd every time I remove the build plate to detach a print.
Cheers
Tris
RE: When to Zero - fromFDMtoSLA - 03-15-2020
do you mean "re-zero" or "re-leveling"?
if it is re-leveling, your buildplate is not really fixed.
re-level and tighten the screws
i did the last leveling weeks ago and it's still Ok, just refill resin and printing
RE: When to Zero - TristanA - 03-15-2020
(03-15-2020, 01:32 AM)fromFDMtoSLA Wrote: do you mean "re-zero" or "re-leveling"?
if it is re-leveling, your buildplate is not really fixed.
re-level and tighten the screws
i did the last leveling weeks ago and it's still Ok, just refill resin and printing
Sorry i do mean re-level i suppose
RE: When to Zero - fromFDMtoSLA - 03-15-2020
did you change the short Inbus- (Allen-) head screws in the buildhead?
i changed them to M6x16 and fasten them very tight during leveling