No Ethernet Jack? - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=4) +--- Thread: No Ethernet Jack? (/showthread.php?tid=444) |
No Ethernet Jack? - mmorning - 04-16-2020 Hi, Im new to the forum, and I did do some searching before I posted and come up empty handed. I just purchased the Elegoo Mars about a month ago and wanted to start adding some improvements. I saw that there was a Mod to add ethernet to the Elegoo mars. When I opened up the machine there was no place to connect the ethernet jack. I guess my questions are 1. Is there a way to add the jack to the PCB 2. IF not can I purchase a PCB that has one and where? RE: No Ethernet Jack? - fromFDMtoSLA - 04-16-2020 The mainboards in the "new" Elegoos are different - without the ethernet-connector. as i know, there is no way to get it on. also the firmware is different and not published yet by Elegoo. the only way to get the RJ45 is, to buy a mainboard for the "older" revision (grey housing, orange cover). sometimes boards are offered by ebay or look at aliexpress - like this: https://www.aliexpress.com/item/4000086832817.html. boards for the Anycubic Photon (not the "S") look like the same; but take care about the connector layout for the lcd. RE: No Ethernet Jack? - mmorning - 04-16-2020 I love the thought process of New versions of thing getting downgraded. Im also looking into the flashair SD card, seems like it will work for what I need but still like the Network jack, I may see if I can track one down somewhere. Thanks for the info and help I appreciate it. RE: No Ethernet Jack? - fromFDMtoSLA - 04-16-2020 flashair SD card is running well on my machine RE: No Ethernet Jack? - drglamenstein - 01-10-2022 Hello, Does the Mars 3 have an Ethernet port that we can expose? My original Mars had an Ethernet port that I was able to expose and use. I use it to start/stop and monitor my prints. Monitoring the print is extremely useful.. It allows me to programmatically turn off the printer's power when the print is finished. I would really like to do the same on my Mars 3, but so far I haven't found any information about an Ethernet port Thanks RE: No Ethernet Jack? - cliffyk - 01-12-2022 I do not believe it does--it was dropped on the plain ol' Mars quite some time ago... |