+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Printing (https://www.elegoomars.com/forum/forumdisplay.php?fid=6)
+--- Forum: Resin (https://www.elegoomars.com/forum/forumdisplay.php?fid=7)
+--- Thread: Elegoo Maroon Resin Cure Time (/showthread.php?tid=454)
Elegoo Maroon Resin Cure Time - Narey - 04-26-2020
Hi guys,
I was wondering if anyone has had experience with using the Mars with Elegoo's 405nm Maroon Resin?
If so, what is the recommended exposure time for the base layers, and the remaining layers?
Thanks!
RE: Elegoo Maroon Resin Cure Time - RayGobot - 07-25-2020
Elegoo's official resin documentation says for the Standard Maroon resin:
Mars - Base layers 75 sec and regular exposure are 13-15 sec
Mars Pro - Base layers 45-50 sec and regular exposure 10-12 sec