+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10)
+--- Thread: Weird mark on underside of the glass (/showthread.php?tid=467)
Weird mark on underside of the glass - kevinbuckley70 - 04-30-2020
There is a weird mark which appears to be on the underside of the printer glass. Don't think it was there originally. Any thoughts?
RE: Weird mark on underside of the glass - fromFDMtoSLA - 04-30-2020
any pictures?
RE: Weird mark on underside of the glass - kevinbuckley70 - 04-30-2020
Sorry I thought I'd attached a pic to the original post !
RE: Weird mark on underside of the glass - fromFDMtoSLA - 04-30-2020
looks like the LCD is "on the way to leave". you should change it, when you get some "trouble" in the printouts
RE: Weird mark on underside of the glass - kevinbuckley70 - 04-30-2020
(04-30-2020, 07:51 AM)fromFDMtoSLA Wrote: looks like the LCD is "on the way to leave". you should change it, when you get some "trouble" in the printoutsIt's brand new. Was bought at Christmas but only unboxed and turned-on about 3 weeks ago. Only on the second bottle of resin.
RE: Weird mark on underside of the glass - fromFDMtoSLA - 04-30-2020
contact Elegoo support to get a replacement LCD - for this problem is no other solution
RE: Weird mark on underside of the glass - fromFDMtoSLA - 05-09-2020
did you get some feedback from Elegoo-support about that problem?
RE: Weird mark on underside of the glass - kevinbuckley70 - 05-09-2020
Yes. Very promptly they agreed to send us a new LCD. Good service. It's a great printer too.