Elegoo 3D Printers Forum
Change Screen Saver Image - Printable Version

+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=4)
+--- Thread: Change Screen Saver Image (/showthread.php?tid=475)



Change Screen Saver Image - benji - 05-06-2020

Is there a way to change the default screen saver image to a custom image on the elegoo mars?


[Image: 1nbe.jpg]


RE: Change Screen Saver Image - fromFDMtoSLA - 05-06-2020

as i know, it's not possible on the easy way. The firmware of the newer machines is not distributed by Elegoo, but you can try by asking the Elegoo support


RE: Change Screen Saver Image - benji - 05-09-2020

(05-06-2020, 03:27 PM)fromFDMtoSLA Wrote: as i know, it's not possible on the easy way. The firmware of the newer machines is not distributed by Elegoo, but you can try by asking the Elegoo support
On the topic of firmware, is there any good alternatives that are more customizable? Is it like FDM where you can use your own customized version of marlin?


RE: Change Screen Saver Image - fromFDMtoSLA - 05-09-2020

the firmwares of the Chitu-boards are not like Marlin. you can find the mainboard also in other SLA-printers, like the Anycubics,
but always "custom-" or "factory-made". the only infos about the firmware i found, was the "Photonsters" on github
( https://github.com/Photonsters )