Hello from Belgium - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: General Discussion (https://www.elegoomars.com/forum/forumdisplay.php?fid=23) +--- Forum: Introductions (https://www.elegoomars.com/forum/forumdisplay.php?fid=25) +--- Thread: Hello from Belgium (/showthread.php?tid=489) |
Hello from Belgium - FreemindNox - 05-12-2020 Hello, I'm Ben, I'm from Belgium and new user of Elegoo Mars. I used FDM 3D Printers for 2 years now, I have a Creality Ender 3 (great printer) and a kit FLSUN I3 (bad printer, hybrid with CR-10 and A8) I'm impressed by the print quality of the Mars, I do my first print yesterday and it was a semi good experience , one of both model on the build plate was a success. Ok, still learning about slicing for MSLA printing, exposure etc.. I hope to get help here and give help if possible. Good print at all! Ben RE: Hello from Belgium - Simoncox - 05-13-2020 hello back from belgium |