Sucking sound - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=2) +--- Thread: Sucking sound (/showthread.php?tid=498) |
Sucking sound - Scote - 05-23-2020 I start to hear a sucking sound after every layer. My guess is the vat is not tight with the lcd screen. Any tip how to solver that? or is it a big concern? RE: Sucking sound - IllDante - 05-28-2020 It's more likely the model sticking to the FEP and creating a suction effect. Is your model hollowed and "sealing" to the FEP? (Is it round, or are the layers printed in a completely "flat" effect?). If so, maybe add some drain holes on your print to ensure air and resin can escape and potentially cause less harm to the FEP layer. |