Replacement bed to big - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1) +--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=4) +--- Thread: Replacement bed to big (/showthread.php?tid=500) |
Replacement bed to big - Owtiger - 05-24-2020 I bought a replacement bed from Amazon and it does not fit on the tower. While the mount looks nearly identical to the old one, it will not slide on. Any suggestions??? RE: Replacement bed to big - fromFDMtoSLA - 05-25-2020 if it does not fit, you should send it back. any pictures? RE: Replacement bed to big - cliffyk - 07-03-2020 ^+1 or 2, In what dimension does it "not slide on", vertically or horizontally--by how much does in "not slide on"? If just a tiny bit it could be a machining burr or swarf that could be easily scraped or filed away. Some times when it will not slide "in" a bit if lubricant can make things work out; back in '72 in 'Nam there was this little chick--well I guess you get the picture, if not I can send it to you... Bottom line , either "hog it out" to make it fit, or send it back. |