+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=1)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=10)
+--- Thread: Z Axis without function (/showthread.php?tid=509)
Z Axis without function - puc2000 - 06-03-2020
Hi all,
my Manual Z-Axis and also automated leveling does not move the z axis anymore (V2.19 Firmware)
any ideas ?
thx
peter