50/50 Siraya Tech BLU TENACIOUS SETTINGS - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Printing (https://www.elegoomars.com/forum/forumdisplay.php?fid=6) +--- Forum: Resin (https://www.elegoomars.com/forum/forumdisplay.php?fid=7) +--- Thread: 50/50 Siraya Tech BLU TENACIOUS SETTINGS (/showthread.php?tid=552) |
50/50 Siraya Tech BLU TENACIOUS SETTINGS - Roblivingstone - 07-13-2020 hey all~ I need some help with settings for Siraya Tech BLU TENACIOUS at 50/50 on the mars. I'm also not sure what support settings i'm going to go with but I think using their settings on the Siraya tech page is going to be fine. Has anyone else here done this mix successfully? RE: 50/50 Siraya Tech BLU TENACIOUS SETTINGS - cliffyk - 07-13-2020 Siraya Blu and Siraya Tenacious are different products. "Blu" comes in translucent blue and a new clear formula ("Blu Clear v2"), "Tenacious" is transparent pale yellow. I really like the Blu Clear V2, it prints well and is quite resilient. Are you referring to a 50/50 mix of Blu and Tenacious? If so, with 50 μm layers I'd go with 5 or 6 base layers at 65 to 75 s each, and 10-12 s per layer after that (maybe up to 15 s/layer if you have problems). RE: 50/50 Siraya Tech BLU TENACIOUS SETTINGS - Roblivingstone - 07-14-2020 (07-13-2020, 07:41 PM)cliffyk Wrote: Siraya Blu and Siraya Tenacious are different products. "Blu" comes in translucent blue and a new clear formula ("Blu Clear v2"), "Tenacious" is transparent pale yellow. I really like the Blu Clear V2, it prints well and is quite resilient. I was referring to the blend of both at 50/50 yes sorry! Thanks for those settings ill give them a shot. I preset some profiles up based on the Siraya Tech sites information provided but they had nothing for the mars on the tenacious (so I used the photon settings for that) but it gave me less to take any sort of educated guess at how the blends settings would work. Have you ever tried a lift distance as small as .75? RE: 50/50 Siraya Tech BLU TENACIOUS SETTINGS - cliffyk - 07-14-2020 (07-14-2020, 03:41 AM)Roblivingstone Wrote:(07-13-2020, 07:41 PM)cliffyk Wrote: Siraya Blu and Siraya Tenacious are different products. "Blu" comes in translucent blue and a new clear formula ("Blu Clear v2"), "Tenacious" is transparent pale yellow. I really like the Blu Clear V2, it prints well and is quite resilient. I have not mucked about with any of that yet. What motion settings do you run? RE: 50/50 Siraya Tech BLU TENACIOUS SETTINGS - Roblivingstone - 07-14-2020 (07-14-2020, 06:25 AM)cliffyk Wrote: I have not mucked about with any of that yet. What motion settings do you run? |