+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Printing (https://www.elegoomars.com/forum/forumdisplay.php?fid=6)
+--- Forum: Resin (https://www.elegoomars.com/forum/forumdisplay.php?fid=7)
+--- Thread: Mars 2 Pro resin settings for NovaStan clear green (Nova3D) using Chitubox (/showthread.php?tid=621)
Mars 2 Pro resin settings for NovaStan clear green (Nova3D) using Chitubox - Plastified - 09-08-2020
I've been trying for 48hrs to successully print baby yoda ( https://www.myminifactory.com/object/3d-print-the-child-baby-yoda-105405 ) and an ocarina ( https://www.thingiverse.com/thing:2798487 ) on the elegoo mars 2 pro.
The default supports always fail at the jonction of the support and the model (tried 75% support, increasing contact surface to 1mm, etc without success),. The model detaches itself from the supports leadin to a print failure.
The only thing I've found is to increase the exposure time to 8 seconds, which defeats the purpose of having a mono lcd screen.
Any way to throubleshoot this ?
Usefull settings for ChiTuBox ?