OEM Z-Axis mast (latest production type)--$40 w/ shipping - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Classifieds (https://www.elegoomars.com/forum/forumdisplay.php?fid=32) +--- Forum: Printer Parts / Accessories For Sale (https://www.elegoomars.com/forum/forumdisplay.php?fid=34) +--- Thread: OEM Z-Axis mast (latest production type)--$40 w/ shipping (/showthread.php?tid=641)

OEM Z-Axis mast (latest production type)--$40 w/ shipping - cliffyk - 09-29-2020 Hello, I recently upgraded my Mars printer (a "SIlver" model, s/n M20Silver20200401) with a Jackson Products twin-rail replacement mast, and have available for sale the original mast as supplied with my printer. It is the latest production configuration with wider spacing of the guide rods (as compared to earlier Mars units) providing improved stability; and has the trapezoidal mounting screw pattern necessitated by that production change. IT has been properly adjusted to require just minimal actuating force (just 4 to 5 ozf) and operates very smoothly. Mounting it on an early production Mars will require slight (2 mm) elongation of the two screw holes nearest the lead screw--this modification will not affect the mast's alignment as the two rearmost screws will accurately position the rail. Asking $40 with Priority Mail shipping to US addresses, however feel free to make an offer...