+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Elegoo Mars Pro 3D Printer (https://www.elegoomars.com/forum/forumdisplay.php?fid=27)
+--- Forum: Maintenance & How-To (https://www.elegoomars.com/forum/forumdisplay.php?fid=31)
+--- Thread: Silicon Sealing Strip (/showthread.php?tid=659)
Silicon Sealing Strip - hedgehog1950 - 10-10-2020
Is there any way to fix the silicon sealing strip to the bottom edge of the cover to stop it coming off when I lift the cover up?
Out of 6 times when I have been practicing setting it up, it has come off 3 times.
This is my first resin printer, so any help would be greatly appreciated.
RE: Silicon Sealing Strip - earthball - 10-17-2020
You could look at using a rubber cement to secure it. Not much sticks to the rubber, so you need specialized cements.
I just gave up an took it off. Hopefully Elegoo will find a better solution on their next printer, but for now it is rather annoying.
RE: Silicon Sealing Strip - hedgehog1950 - 10-26-2020
Thanks for that.
I should have thought of that myself, but when you are trying something new, You don't often think of the obvious things straight off.