disattivazione ventola (fan deactivation) - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 2 Pro (https://www.elegoomars.com/forum/forumdisplay.php?fid=46) +--- Forum: Printer Mods / Add-Ons (https://www.elegoomars.com/forum/forumdisplay.php?fid=49) +--- Thread: disattivazione ventola (fan deactivation) (/showthread.php?tid=775) |
disattivazione ventola (fan deactivation) - djfabietto - 02-23-2021 Sulla Elegoo Mars 2 pro e' possibile disattivare la ventola una volta finito il lavoro ? volevo collegare un arduino alla chitubox e quando la stampa e' conclusa mi spegne la ventola rumorosa o anche tutta la stampante. buona giornata. (google traslate) Is it possible to turn off the fan on the Elegoo Mars 2 pro once the job is finished? I wanted to connect an arduino to the chitubox and when the printing is finished I turn off the noisy fan or even the whole printer. good day. RE: disattivazione ventola (fan deactivation) - TheCase - 07-25-2021 If you export your current configuration and open the saved file in an editor, you should see a config line for "startGcode:" change the line so it looks like this: Code: startGcode: "M8030 T-2" Then import the modified file into Chitubox. Note that this is not the factory default, so use at your own risk. See this document for known Chitu/Mars GCodes: https://docs.google.com/document/d/14UBMO0Vhh9Lr0V3xcdetQ2_4UDnjFnho7OnbNxLOs3o/view# |