+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8)
+--- Forum: General Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=11)
+--- Thread: Z axix to high (/showthread.php?tid=800)
Z axix to high - fabulus - 03-26-2021
Good morning
My name is Fabio and i have a Saturn printer.
I have a problem.
I mistakenly mounted the platform which then hit the tub as it went down.
I redid the calibration of the z axis and everything seems to be in order, but when the printing starts, the plate reaches zero, then rises about 2cm and starts printing from there.
Obviously it doesn't print anything as it starts from a high position.
What can I do ?
Sorry for my English.....
RE: Z axix to high - RDM591 - 06-16-2021
(03-26-2021, 01:13 AM)fabulus Wrote: Good morningI am having the same issue, trying to reach out to Elegoo support,
My name is Fabio and i have a Saturn printer.
I have a problem.
I mistakenly mounted the platform which then hit the tub as it went down.
I redid the calibration of the z axis and everything seems to be in order, but when the printing starts, the plate reaches zero, then rises about 2cm and starts printing from there.
Obviously it doesn't print anything as it starts from a high position.
What can I do ?
Sorry for my English.....