print sticking to FEP instead print bed. - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8) +--- Forum: Prints Sticking to the FEP Film (https://www.elegoomars.com/forum/forumdisplay.php?fid=12) +--- Thread: print sticking to FEP instead print bed. (/showthread.php?tid=835) |
print sticking to FEP instead print bed. - rockmaster007 - 06-10-2021 just for general information. I had 4 failed prints, but after finding out my print bed was to far away from the fep, I was able to get successful prints. I was using cardstock instead of standard A4. it's a little thicker. I hope this helps people out. SB |