Printing issues, fails every time - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Elegoo Mars 2 Pro (https://www.elegoomars.com/forum/forumdisplay.php?fid=46) +--- Forum: Getting Started (https://www.elegoomars.com/forum/forumdisplay.php?fid=47) +--- Thread: Printing issues, fails every time (/showthread.php?tid=986) |
Printing issues, fails every time - Gewehr123 - 07-20-2021 Hi guys, im getting desperate, i have my mars 2 pro for 2 days and only thing that printed succesfully is the Rook. Every time i finish printing, part of the model is dropped in the Vat formed a blob and the rest of the print is unfinished. can you help me with troubleshoot ? i tried everything: 1.) tried multiple bottom/normal exposure times for multiple tries. 2) recalibrated a several times. 3) used 3 types of slicers. 4) tried to print less complicated models like benchy but fails like so. i have Mars 2 pro and using 3dJake basic color mix resin every print comes out like this: see attatchment RE: Printing issues, fails every time - mzanetti - 07-23-2021 Can you share a screenshot of the model in the slicer? |