08-05-2021, 03:30 AM
(This post was last modified: 08-05-2021, 03:35 AM by Christian.N.)
Hi everyone,
I recently bought an Elegoo Mars Pro Printer and take my first steps with it. The Rooks printed finde but the cover Plates I try to print for a Friend seem to have errors in them that look like layer shifts, which I did not expect from such a machine:
Actually, it looks more like the part got an bit of an angle while printing and then rightend itself again after some time at the horitontal fault. Also, the vertical lines or "shimmer" seems off to me...
Setup in Chitubox:
Resin is Official Elegoo Black, has annyone an Idea how this comes?
P.S. Sorry for the messy post, accidentialy clicked post before I wanted.
I recently bought an Elegoo Mars Pro Printer and take my first steps with it. The Rooks printed finde but the cover Plates I try to print for a Friend seem to have errors in them that look like layer shifts, which I did not expect from such a machine:
Actually, it looks more like the part got an bit of an angle while printing and then rightend itself again after some time at the horitontal fault. Also, the vertical lines or "shimmer" seems off to me...
Setup in Chitubox:
Resin is Official Elegoo Black, has annyone an Idea how this comes?
P.S. Sorry for the messy post, accidentialy clicked post before I wanted.