Hi
Firmare ver. V4.4.3-c2_LCDC/1620X2560 /F9.25
I printed a couple of test models - everything worked.
For several months the printer was in the cabinet - now I took it out and the UV lamp and the Z-axis motor do not work. And if you connect the motor to my other printer (Ender 3) - the motor works.
Firmare ver. V4.4.3-c2_LCDC/1620X2560 /F9.25
I printed a couple of test models - everything worked.
For several months the printer was in the cabinet - now I took it out and the UV lamp and the Z-axis motor do not work. And if you connect the motor to my other printer (Ender 3) - the motor works.