11-12-2021, 03:49 PM
There's a M8489 g-code in the machine parameters :
M8489 P1 ; action after printing is completed
; 0: Turn off all motors,
; 1: Does not work after printing,
; 2: After printing is completed, return to zero, the motor is not powered
; 3: After the printing is completed, it drops to the maximum stroke of Z, and the motor is continuously powered.
suggest you standby ready to pull the power if you try any of these:-)
M8489 P1 ; action after printing is completed
; 0: Turn off all motors,
; 1: Does not work after printing,
; 2: After printing is completed, return to zero, the motor is not powered
; 3: After the printing is completed, it drops to the maximum stroke of Z, and the motor is continuously powered.
suggest you standby ready to pull the power if you try any of these:-)