12-25-2021, 12:23 PM
Just picked up a Mars 2 Pro and I'm having an issue. Haven't seen another post here describing the problem.
It won't print.
So I did the setup. Levelled the build platform, set the Z axis home position, test the LCD to make sure it works. Everything seems fine.
I put the resin in the tank, loaded the Rook.ctb file to test print.
The build platform lowers into the tank, and then just sits there, making loud noises and staying at 1% for 20-30 minutes. No movement, nothing changing on the screen.
I've tried it three times now, with no changes.
Any ideas what is going on here?
It won't print.
So I did the setup. Levelled the build platform, set the Z axis home position, test the LCD to make sure it works. Everything seems fine.
I put the resin in the tank, loaded the Rook.ctb file to test print.
The build platform lowers into the tank, and then just sits there, making loud noises and staying at 1% for 20-30 minutes. No movement, nothing changing on the screen.
I've tried it three times now, with no changes.
Any ideas what is going on here?