12-28-2021, 01:14 PM
I'm having the same issue. I have realigned the build platform multiple times, but when I go to print:
1. The machine produces a loud hum
2. The elapsed timer begins counting (bottom middle)
3. The time to print time is never displayed (remains at -h-m)
4. The progress never proceeds past 0, even when waiting for 20-30 minutes
5. The pictures of the level being printed are not displayed and the level counter never advances.
6. The build plate never moves.
There are no error messages displayed. All it does is sit there and hum/buzz.
Yesterday, I mistakenly ran the exposure test with the build plate in the goo and got the elegoo symbol/etc from the test on the build plate which I had to scape off, which I considered a successful test of the LCD/Resin and build plate adherence.
It will not print the rooks, or print the cylinder test from the Chitubox software.
Any ideas?
1. The machine produces a loud hum
2. The elapsed timer begins counting (bottom middle)
3. The time to print time is never displayed (remains at -h-m)
4. The progress never proceeds past 0, even when waiting for 20-30 minutes
5. The pictures of the level being printed are not displayed and the level counter never advances.
6. The build plate never moves.
There are no error messages displayed. All it does is sit there and hum/buzz.
Yesterday, I mistakenly ran the exposure test with the build plate in the goo and got the elegoo symbol/etc from the test on the build plate which I had to scape off, which I considered a successful test of the LCD/Resin and build plate adherence.
It will not print the rooks, or print the cylinder test from the Chitubox software.
Any ideas?