04-28-2022, 06:09 PM
At blog.honzamrazek.cz the problem about "backlight always on" has been described. My Saturn showed this
identical problem which I fixed this week. When scrolling down this page, a user called "Bernard" describes
some designflaws for the Saturn controllerboard. Some things are kinda "out of balance".
Between the lines I see solutions / tricks how to improve the controllerboard.
He also created a kit for the Saturn to shorten printjobs. The way I understand printing should go 2x
faster. When VROOMing I just get 10 to 15% faster printjobs. It would be even more promising to use such kit
and VROOMing together. Anyone able to confirm doubling the UV curingpower really increases a printjob by 2 ?
identical problem which I fixed this week. When scrolling down this page, a user called "Bernard" describes
some designflaws for the Saturn controllerboard. Some things are kinda "out of balance".
Between the lines I see solutions / tricks how to improve the controllerboard.
He also created a kit for the Saturn to shorten printjobs. The way I understand printing should go 2x
faster. When VROOMing I just get 10 to 15% faster printjobs. It would be even more promising to use such kit
and VROOMing together. Anyone able to confirm doubling the UV curingpower really increases a printjob by 2 ?