04-30-2022, 06:54 AM
Sounds like the resin has adhered to both plate and FEP
Carefully release the tank (don't spill resin!) , and plate , raise the head and remove both together , then you can drain the uncured resin and wash the tank and plate ( so you don't get too much resin on yourself) then peel the part from the FEP.
If the motor will not lift : power off and twist the leadscrew to lift the plate
Carefully release the tank (don't spill resin!) , and plate , raise the head and remove both together , then you can drain the uncured resin and wash the tank and plate ( so you don't get too much resin on yourself) then peel the part from the FEP.
If the motor will not lift : power off and twist the leadscrew to lift the plate