This might be a good one for Grant at 3dmusketeers.com and his youtube channel show called 'print fail Friday ' (he is genuinely a helpful and knowledgeable guy)
What temperature is your print room/area? Cold ,i.e below 20'C can cause failed prints and so, I suppose, can very hot temperatures.
Might be worth experimenting with an exposure test print like the 'test cones' (I'll have to look up the name) or similar.
https://www.reddit.com/r/resinprinting/c...p_foundry/
What temperature is your print room/area? Cold ,i.e below 20'C can cause failed prints and so, I suppose, can very hot temperatures.
Might be worth experimenting with an exposure test print like the 'test cones' (I'll have to look up the name) or similar.
https://www.reddit.com/r/resinprinting/c...p_foundry/