(08-25-2023, 06:47 AM)tantrumus Wrote: The network feature does not work, gave up on that. #1 reason I bought this over the standard Saturn 3.
I ran into the same problem - broken network communication.
However, I managed to solve it.
I am using Slicer Chitubox 1.9.5 on WIN 10
I contacted support and they sent me quite detailed instructions.
Although it was not completely accurate, it helped me to solve the problem
1. I set the network parameters on the printer.
2. I verified its availability on the network via ICMP
3. I tried to open the Network sending window - the printer was visible here
When a problem occurred here, the transmission crashed.
In the instructions from the support, it was necessary to turn off the Win FireWall - but this is not completely kosher for the normal operation of WIN 10, for example, in corporate networks.
4. however, I turned off the Win FireWall to test the function - and indeed the transfer to the printer went correctly.
5. On the activated Win FireWall, I then enabled Chitubox communication with the printer in its detailed settings.
I've been printing over the net ever since ;-)