No one have a clue for M28 ??
Here are Mxx GCODE known working
If someone find another ..
(I know there's a PDF on this post with some GCODE)
Here are Mxx GCODE known working
Code:
M20 'xxx' (list folder content)
M23 xxx (select file)
M27 (print state)
M28 (create file)
M29 (end creating file)
M30 xxx (delete file)
M33 (stop printing)
M114 (get current position)
M115 (firmware Info)
M4000 (status >> B:0/0 X:0.000 Y:0.000 Z:154.840 F:256/256 D:0/0/0)
M4001 (returns the configured stepper movement for all axis >> X:0.011430 Y:0.011430 Z:0.000625 E:0.001340 T:0/0/0/158/1 U:'GBK' B:1)
M4002 (version)
M4004 (? return ok C:0 or ok C:1)
M4005 (?)
M4006 (last selected file)
M4010 (?)
M4011 (? related to M4012)
M4012 Ix (? return ok 0/x)
M6032 'xxx' (select file in memory)
M6040 Ixxx (reboot after xxx ms)
M6054 'xxx.png' (show image)
M8030 Ix (fan : 0 off, -1 always on, -2 on when printing only)
M8093 I1 (dump error code status)
M8512 'xxx' (dump eeprom config in file)If someone find another ..
(I know there's a PDF on this post with some GCODE)