11-09-2020, 10:15 AM
(This post was last modified: 11-09-2020, 12:03 PM by bob_the_vampire.)
Hi thanks for the quick reply, I'm still on a learning curve with those raspi.
So i managed to install minicom and configure it, next I tried to communicate with the mars
both m4000 and m4006 nothing come back, next I tried to loop back the serial to be sure nothing was keeping me from using it and everything I sent came back instantly so the problem isn't coming from the pi nor your soft
I'll take a third look to my cables and the welds on the Mars MB
Edit: I just realize that I don't have the 3.3V at TX RX on the mars MB is it normal?
So i managed to install minicom and configure it, next I tried to communicate with the mars
both m4000 and m4006 nothing come back, next I tried to loop back the serial to be sure nothing was keeping me from using it and everything I sent came back instantly so the problem isn't coming from the pi nor your soft
I'll take a third look to my cables and the welds on the Mars MB
Edit: I just realize that I don't have the 3.3V at TX RX on the mars MB is it normal?