11-02-2021, 05:55 AM
(This post was last modified: 11-02-2021, 08:22 AM by demon_lee.
Edit Reason: print test model. got the result
)
(11-23-2020, 11:21 AM)RedDevilLax31 Wrote: I don't have it yet but planning on getting a Mars 2 Pro around Christmas time so I have been lurking and planning around it a little. I wanted to be sure to have an exposure test so I went through and edited the model, then processed the ctb file with 010 editor to adjust all needed settings and remove the lifting for the layers after the base layer and should have a 50 micron file for AA 4. Not 100% sure if this works or not but thought I would share it in case its needed. its also set up for the Mars 2 Pro to have .25 second intervals instead of the 1 second in the standard file. I assumed with a exposure time of 2-3 seconds the .25 multiples would be much better than 1 second multiples. If someone wants to test the file feel free and let me know how it works.
sorry wouldn't let me attach the .ctb file, ill port somewhere and provide a link
Forked the GitHub to upload the file there, can be found at https://github.com/RedDevilLax31/resin_x...r_mars_pro
Hi!
What is the exposure time of the first model and what is the last in test?
0.25 sec - 0.5 - 0.75 - 1.0 - etc.?
and 50um_a4_UvTest3V5.ctb is wrong. lifting of the table between layers is about 1mm, not 50 microns.