11-14-2019, 10:33 AM
(This post was last modified: 11-14-2019, 10:34 AM by Blackbird2016.)
(11-14-2019, 10:12 AM)SpaceDandy Wrote:I didn´t get my motor, yet. Seems to have stalled in German customs for some reason.(10-21-2019, 09:45 AM)Blackbird2016 Wrote:(10-21-2019, 07:48 AM)mckeemorology Wrote: Thank you so much for this. Process makes total sense and worked perfectly. One of my mars was losing 1.4mm, the other 1.0mm, and both print *perfectly* now. I'm so glad we finally have a good solution that doesn't involve "just print on supports" or "get a hex wrench..."Glad to be of help!
And still.... If you get in contact with Elegoo they provide a modified motor in a very friendly manner.
Can I ask what you received? They sent me a replacement z-axis assembly, but it looks identical to the existing one, down to the part number. I have fitted it and am running a test print, but it feels like they may have sent me an in modified replacement. Is there any visual difference?
As far as I know you get mainly a new motor which internally features a different harder spring-shim for less play/air.
Makes no difference for me, when it eventually arrives I will mount it.
And still I am considering to do the leveling before every print, even with the new one since it makes the prints more accurate und just needs a few seconds for every several-hour print...