Modified Gcode to only run the cooling fan while the printer is running

Current time: 04-19-2024, 09:04 PM Hello There, Guest! Register

Thread Rating:

3 Vote(s) - 5 Average

Thread Modes

Modified Gcode to only run the cooling fan while the printer is running

Umpa

Offline

Junior Member

Posts: 24
Threads: 1
Joined: Jul 2020
Reputation: 1

#21

08-22-2020, 01:04 AM

I wondered about that too, did you make your measurements with the tank with resin on or off the machine ? I suspect that will make a difference.

Find

Reply

« Next Oldest | Next Newest »

Messages In This Thread

Modified Gcode to only run the cooling fan while the printer is running - by admin - 07-17-2019, 10:54 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by obv - 07-18-2019, 02:18 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by bluloo - 08-15-2019, 07:46 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by f15sim - 08-16-2019, 06:01 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by blubarist - 08-16-2019, 09:34 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by f15sim - 08-16-2019, 09:41 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by admin - 09-05-2019, 01:01 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Formless63 - 09-03-2019, 07:29 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by admin - 09-03-2019, 12:32 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Spinnetti - 09-04-2019, 05:44 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by admin - 09-05-2019, 12:54 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Spinnetti - 09-05-2019, 04:19 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by eowindel - 10-13-2019, 04:13 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by admin - 10-13-2019, 05:17 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by OZ2CPU Thomas Scherrer - 12-24-2019, 08:39 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Umpa - 08-18-2020, 12:01 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by captcook - 01-30-2020, 05:38 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by thinkfloyd - 04-10-2020, 01:34 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by quartelli - 08-21-2020, 12:23 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by cliffyk - 08-21-2020, 09:08 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Umpa - 08-22-2020, 01:04 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by cliffyk - 08-22-2020, 04:43 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Umpa - 08-22-2020, 09:29 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by cliffyk - 08-22-2020, 10:59 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Umpa - 08-23-2020, 10:09 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by cliffyk - 08-23-2020, 01:38 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Umpa - 08-24-2020, 08:59 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by ask4more - 08-26-2020, 12:01 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by CAPTAIN1962 - 10-31-2020, 04:10 AM

RE: Modified Gcode to only run the cooling fan while the printer is running - by Jupp3 - 12-03-2020, 05:31 PM

RE: Modified Gcode to only run the cooling fan while the printer is running - by cliffyk - 12-04-2020, 07:17 AM

View a Printable Version

Forum Jump:

Users browsing this thread: 1 Guest(s)