08-09-2019, 09:42 AM
Hi,
I encountered a problem when printing objects with more than 4028 layers. The two times i tried to print such an object the printer just stopped mid print at layer 4028 and lifts the plattform up
like it is finished with the object.
Both times that happend around 22h in. I tried to resume the print by pressing the pause and play button a few times. The press of the button itself is registered by the printer
as the icon changes. However the print is not resumed.
I am using Chitubox V1.5.0 on Linux for slicing. I have verified the integrity of the cbddlp file by calculating a sha1 hash of both the file generated by the slicer as well as the file on the usb stick.
The installed firmware on the printer is V4.2.16_LCD /1440x2560 /F2.7 which was already installed when I received the unit.
Do you have any hints how I can avoid this problem?
I encountered a problem when printing objects with more than 4028 layers. The two times i tried to print such an object the printer just stopped mid print at layer 4028 and lifts the plattform up
like it is finished with the object.
Both times that happend around 22h in. I tried to resume the print by pressing the pause and play button a few times. The press of the button itself is registered by the printer
as the icon changes. However the print is not resumed.
I am using Chitubox V1.5.0 on Linux for slicing. I have verified the integrity of the cbddlp file by calculating a sha1 hash of both the file generated by the slicer as well as the file on the usb stick.
The installed firmware on the printer is V4.2.16_LCD /1440x2560 /F2.7 which was already installed when I received the unit.
Do you have any hints how I can avoid this problem?