09-19-2019, 06:19 PM
Remove the resin tank. Take a piece of blue painters tape, 3/4 or 1 inch wide and about 4" long. Place a strip of tape on each end of the screen in the black area & not in the "live" part of the screen. Replace the resin tank. The blue tape will prevent the FEP film from sticking to the screen due to suction caused by the build plate pressing on the bottom of the tank and lifting up. Under some conditions of humidity & temperature without the little edge created by the painters tape, the FEP will stick tightly to the screen making it difficult to remove the tank or the plate to raise properly.